MTM - MTM/HP
MTM - MTM/HP
Soil stabilizer-Rock shredder-Stone crusher-Asphalt shredder with a max working depth of 40 cm/16'', with variable shredding chamber for tractors between 240 and 360 HP.
Multipurpose machine designed for high output tractors. Equipped with the latest FAE technologies, this machine can stabilize, crush rock, grind asphalt and mill slab, at working depths up to 40 cm/16''.
Thanks to its compact size and excellent maneuverability, it can work in smaller areas which "self-propelled machines" cannot access. It can be also be quickly and easily moved from one jobsite to the next. The latest FAE Variable Geometry System crushing chamber is an innovative design that guarantees the outstanding crushing and shredding results. The rotor is hydraulically adjusted up or down to set the volume of the grinding/mixing chamber in relation to the working depth.
The tractor's traction power and output is reduced by the fact that the rotor penetrates the ground while the body of the machine remains on the surface. This means reduced fuel consumption and increased operating speed, and hence lower running costs. The crushing chamber is protected by HARDOX® panels, fully and easily interchangeable without removing the rotor. The dual gear transmission allows for constant, consistent and uniform rotor operation at optimal working speeds. The internal HARDOX® counter knife and rear grill system ensure an ideally sized final product
The optional Water Spray System, controlled from the cab of the tractor, optimizes the mixing of the soil with the binding agents during stabilization. It also helps keep the rotor temperature down during asphalt grinding.
To provide a complete solution for any application, two types of rotors and multiple tooth options are available.
The latest FAE technology allows the same asphalt shredding tooth to be mounted on both rotors.
The standard equipment includes:
- PTO drive shaft with cam clutch (for tractors between 240 and 300 HP)
- double transmission with casted gearboxes
- forged tool holders made of heat treated steel
- „Double steel cage system" machine shell (WELDOX®)
- adjustable HARDOX® counter blade
- adjustable grid
- variable crushing chamber
- rear hydraulic protection/grader flap
- hydraulic front hood
- internal protections in HARDOX® steel
- bolted forged rotor axels
Available on demand: ydraulic top link, water spray system, reinforced transmissionfor tractor with more than 300 HP.
Possibility to have the rotor equipped with tooth type “G/3”.