Soil Stabilizers
STABI/FRS - STABI/FRS/HP

Soil stabilizer for PTO tractors with fixed-geometry chamber.

The new STABI/FRS (Fixed Rotor System) for tractors up to 500 hp is an essential stabilizer capable of high performance in terms of productivity. Stable and strong, even on very hard ground with stones, it is suitable for small work sites as well as for important infrastructural work, such as highways, parking lots and airports.

The slightly protruding rotor facilitates the stabilization at depth without great absorption of power. The fixed-geometry chamber makes it possible to work soil up to 50 cm deep, guaranteeing an excellent mixing quality. A single frame and the use of special materials guarantee structural robustness and rigidity that translate into excellent resistance to wear.

Engine

from 300 to 500 hp

Working depth

20 in max

Most important features
Hydraulic rear Hood with anti-clogging system

for high productivity and lower fuel consumption

INTERCHANGEABLE HARDOX® INTERNAL

AND SIDE GUARDS

Applications:

  • ROAD CONSTRUCTION
  • SOIL STABILIZATION
  • STABILIZATION IN THE PRESENCE OF STONES
STABI/FRS - STABI/FRS/HP

Standard equipment

    • Hydraulic rear Hood with anti-clogging system NEW
    • Interchangeable inner antiwear plates in Hardox®
    • Enclosed machine body
    • Inside lateral protection
    • Protection chains
    • Transmission with side gearbox
    • Side gearbox with oil cooling system (HP)
    • Gearbox with freewheel
    • 8cc gear motor with integrated anticavitation valve
    • Friction clutches
    • Gearbox with oil cooling system (HP)
    • Bolted-on rotor shafts (in forged steel)
    • Dozing blade

Teeth

Designed to be incomparable
Teeth A/3
standard
Ideal for:
Peaty soil
Teeth A/3/HD
optional
Ideal for:
Peaty soil
Low rock content
Teeth F/3
optional
Ideal for:
Rocks
Paved roads
Teeth F/3 R44-22
optional
Ideal for:
Peaty soil
Paved roads
Side scraper STC/FP
standard
Ideal for:
Peaty soil
Rocks

Options

Multiple tooth options
Hydraulic top link
W style self aligning device between PTO drive shaft/gearbox
Dozing blades with spring system
Water spray system WSS High Flow
FCS full control system
Technology
WATER SPRAY SYSTEM

The Water Spray System has the dual function of cooling and mixing.
The cooling function, useful when the machines work as an asphalt cutter (see multi-task machines), has the advantage of limiting the temperature of the rotor and teeth in contact with the asphalt, preventing it from overheating.
The mixing system, on the other hand, is useful in stabilization operations (see multi-task machines and stabilizers) in which the soil and the stabilizing agent are mixed with water.
In fact, at this stage, the addition of water to the mixing chamber improves binding between the stabilizing agent and the soil, optimizing the result of the consolidation work.

Technology
Full Control System

The Full Control System is a top-of-the-line system with electronically adjusted nozzles, a self-priming hydraulic pump, proportional valves to adjust the water flow and a control display unit for settings, diagnostics and the machine’s operating status.

PRIVACY POLICY - DATA PROTECTION STATEMENT

Pursuant to current legislation and the provisions of Article 13 of EU Regulation 2016/679 of the European Parliament and the Council of Europe of 27 April 2016 dealing with the protection of natural persons with regard to the processing of personal data and the free circulation of said data (hereinafter "Regulation"), we inform you that the Data Controller of the data you have provided is FAE Group S.p.A. (hereinafter FAE) whose registered office is Unit 18| of the Zona produttiva I-38013 Fondo (TN) Tax Code and VAT no. 01942570225

Web browsing data
The IT systems and software programs used for running this website collect certain personal data whose transmission is implicit in the use of Internet communication protocols (e.g. the IP addresses or domain names of the computers used by users who access the website, as well as the URI addresses -Uniform Resource Identifier - of the information requested, the time of the request, the method used to submit the request to the server, the size of the file obtained in response, the numerical code indicating the status of the response given by the server -success, error, etc.). and other parameters relating to the operating system and to the user’s IT environment. This information is not collected in order to be linked to identified data subjects, but by its nature could, through processing and association with data held by third parties, allow users to be identified.


The data is used for the sole purpose of obtaining statistical information not associated with any user identification data on the use of the website and to check that it is functioning correctly and is deleted immediately after processing. The data may be used to ascertain liability in the event of hypothetical computer crimes against the website.

Data provided voluntarily by the user

The user is not required to provide his or her personal data in order to access this website.

However, any contact with FAE, or the discretionary, deliberate or spontaneous sending of messages, e-mails or conventional mail, to the FAE addresses indicated on this website will result in the subsequent acquisition of the address, including e-mail, of the sender or their telephone number, which are needed in order to respond to requests, as well as any other personal data included in their correspondence.

The data will be used only for the purpose of responding to the user's request. It will be used only internally for commercial purposes and will not be passed on to third parties.

The processing of data for these purposes does not require your consent since it is necessary for the implementation of a contract to which you are a party or the implementation of pre-contractual measures taken at your request (Article 6, paragraph 1, letter b) of the Regulation), as well as, where applicable, to fulfil a legal obligation (Article 6, paragraph 1, letter a) of the Regulation).

The processing of the data will be carried out by personnel appointed by FAE using procedures, technical and IT tools intended to protect the confidentiality and security of your data and involves collecting, recording, organizing, storing, consulting, processing, modifying, selecting, extracting, comparing, using, linking, blocking, communicating, disseminating, deleting or destroying said data including a combination of two or more of the above activities.
Your data will not be passed on to others.

Within the scope of its activities and for the purposes indicated above, FAE may use services provided by third parties acting on behalf of FAE and according to its instructions, as data controllers. These third parties provide FAE with processing or core services (e.g. IT services for the functioning of the site). You can request a complete and updated list of the persons appointed as data controllers by getting in touch with one of the contacts listed below.
The data may be circulated within the European Union, where FAE or its suppliers are based or have their own servers in these countries. The data will not be circulated outside the European Union.
FAE shall have the right, at any time, to exercise the rights provided for under current legislation, including the right to:

by sending a specific request to XX email: privacy@fae-group.it

Unsubscribe from Newsletter
At any time the User can cancel his/her subscription to the FAE Newsletter by following the instructions given in the email received.