Road planers for skid steers

The RPL/SSL/DT is a road planer for skid steers from 90 to 135 hp that mills down to 14 cm deep. The RPL/SSL/DT is ideal for road preparation before adding a new layer of asphalt or concrete. Self-leveling skids and tilt ensure optimal results. Operational precision is also ensured by the hydraulic drive system — which makes it possible to work right up against a wall on the right or left — as well as practical depth and cutting indicators. The dual transmission guarantees optimal power supply and distribution across the entire width of the rotor. The line is completed with teeth specifically designed for asphalt and concrete road surfaces.


from 90 to 135 hp

Working depth

14 cm max

Most important features
Cutting and depth indicators

for precise operation control


for optimal results on uneven surfaces

Skids with Hardox soles and interchangeable plows

allow the machine to penetrate the ground better

Hydraulic drive system

for accurate positioning over the work area

Extraordinary flexibility

it can work very close to the walls at left and at right

Standard equipment

    • Diverter valve 12 V
    • Anti-shock block Valve with relief and anticavitation valves
    • Direct drive motor transmission
    • Mechanical floating tilt system
    • Independent hydraulic skid's control
    • Mobile sides-frame
    • 565 cc fixed displacement hydraulic piston motor
    • Interchangeable and wear resistant Hardox® skids
    • Asphalt round bit teeth
    • Cutting indicator
    • Hydraulic side shifting
    • Enclosed / anti dust machine body
    • Working pressure control gauge
    • Hydraulic hoses for connections

Original FAE tools

Unmatched performance
Pick R/44/A| FAE
Pick R/44/A
Ideal for:
Paved roads
Pick R/44/C | FAE
Pick R/44/C
Ideal for:
Paved roads


Hydraulic floating tilt system
Multiple tooth options | FAE
Multiple tooth options
Water spray system WSS Basic | FAE
Water spray system WSS Basic
Adaptor wiring | FAE
Adaptor wiring
Water Spray System

The Water Spray System has the dual function of cooling and mixing.
The cooling function, useful when the machines work as an asphalt cutter (see multi-task machines), has the advantage of limiting the temperature of the rotor and teeth in contact with the asphalt, preventing it from overheating.
The mixing system, on the other hand, is useful in stabilization operations (see multi-task machines and stabilizers) in which the soil and the stabilizing agent are mixed with water.
In fact, at this stage, the addition of water to the mixing chamber improves binding between the stabilizing agent and the soil, optimizing the result of the consolidation work.

Find out more >

Request information