Multifunción
MTL

Trituradora de rocas-Fresadora de lozas de rocas- Estabilizador de suelos y Fresadora de asfalto para tractores.

La MTL permite estabilizar suelos, triturar losas de rocas, triturar rocas y fresar asfalto con una profundidad de trabajo máxima de hasta 28 cm.
Las láminas internas de protección, atornilladas tanto en el centro como a los lados, hacen de esta máquina robusta y confiable al mismo tiempo, mientras que los detalles, como el sistema de cámara de trituración de geometría variable, la parrilla ajustable en la compuerta de trituración, y las cuchillas contra corte ajustable de acero Hardox®, aseguran excelentes resultados en términos de trituración.
Una vez más FAE puso la mayor atención a los detalles, como lo comprueba el renovado control de nivel de profundidad, que permite verificar la profundidad de trabajo directamente desde la cabina del tractor y la transmisión central con ajuste de altura dispuesta para acoplar la maquina a la amplia gama de tractores disponibles en el mercado

Tractor

entre 140 y 240 hp

Profundidad maxima de trabajo

28 cm máx 

Las características más importantes
Camera a geometria variabile

per lavorare il terreno con precisione ed ottenere una miscelazione ottimale

Aplicaciones:

  • CONSTRUCCION DE VIAS
  • TRITURACION DE ROCAS
  • FRESADO DE LOZAS DE ROCAS
  • FRESADO DE ASFALTO, MEZCLA Y RECICLAJE
  • ESTABILIZACION DE SUELOS
  • ESTABILIZACION DE SUELOS CON PRESENCIA DE ROCAS
Visualizar todas Oculta
MTL

Equipamiento de serie

    • Compuerta trasera hidráulica
    • Parrilla atornillada en compuerta trasera
    • Laminas internas anti desgate de acero Hardox®
    • Cuerpo y estructura interno “anti polvo”
    • Càmara de trituración de geometrìa variable
    • Protección lateral interna
    • Cadenas de protección atornilladas
    • Cuchilla contra corte ajustable de acero Hardox®
    • Transmisión por engranajes laterales
    • Transmisión con rueda libre
    • Embrague al extremo del toma de fuerza PTO
    • Eje de toma de fuerza con limitador de par
    • Puntas de eje del rotor atornilladas (en acero forjado)
    • Cuchilla dosificadora amortiguada

Dientes

Concebidos para ser inimitables
Dientes G/3
standard
Ideal para:
Tocones enterrados
Suelo turboso
Pocas piedras
Carreteras asfaltadas
Dientes G/3 HD
optional
Ideal para:
Tocones enterrados
Suelo turboso
Carretera bituminosa
Pocas piedras
Dientes G/3 R44
optional
Ideal para:
Tocones enterrados
Suelo turboso
Carretera bituminosa
Pocas piedras
Dientes R65
optional
Ideal para:
Suelo turboso
Pocas piedras
Dientes R/HD 65
optional
Ideal para:
Suelo turboso
Pocas piedras
Carreteras asfaltadas
Losas de roca
Dientes R44
optional
Ideal para:
Suelo turboso
Carreteras asfaltadas
Carreteras asfaltadas
Raspador lateral STC/3/FP
standard
Ideal para:
Suelo turboso
Rocas
Raspador lateral R/HD 65
standard
Ideal para:
Suelo turboso
Pocas piedras

Equipamiento a petición

Diferentes tipos de dientes
Tercer punto hidráulico
Sistema de aspersión de agua WSS Básico
Sistema de aspersión de agua WSS Alto Flujo
Tecnología
WATER SPRAY SYSTEM

Este sistema de aspersión de agua tiene una doble función de refrigeración y de mezclado.
La función de refrigeración, útil cuando las máquinas funcionan como fresadoras de asfalto (véase máquinas multifunción), tiene la ventaja de limitar la temperatura del rotor y de los dientes en contacto con el asfalto, impidiendo su sobrecalentamiento.
Por otro lado, la función de mezclado resulta útil en las operaciones de estabilización (véase máquinas multifunción y estabilizadoras) en las que el terreno y el agente estabilizador se mezclan con el agua.
En esta fase, la adición de agua en la cámara de mezclado ayuda a amalgamar el agente estabilizador y el terreno, optimizando así el resultado del trabajo de consolidación.

Tecnología
Càmara de trituración de geometrìa variable

Solución tecnológica única en el sector que permite penetrar en el suelo solamente con el rotor. El rotor móvil se puede ajustar hidráulicamente desde la cabina del tractor. El volumen de la cámara es variable: cuanto más se trabaja en profundidad, más aumenta el volumen de la cámara.

Con respecto a una máquina que penetra con la estructura en el suelo, la cámara de geometría variable reduce los esfuerzos de tracción, lo cual permite una reducción del consumo de combustible, un incremento de la velocidad operativa y un mayor ahorro de tiempo.

PRIVACY POLICY - DATA PROTECTION STATEMENT

Pursuant to current legislation and the provisions of Article 13 of EU Regulation 2016/679 of the European Parliament and the Council of Europe of 27 April 2016 dealing with the protection of natural persons with regard to the processing of personal data and the free circulation of said data (hereinafter "Regulation"), we inform you that the Data Controller of the data you have provided is FAE Group S.p.A. (hereinafter FAE) whose registered office is Unit 18| of the Zona produttiva I-38013 Fondo (TN) Tax Code and VAT no. 01942570225

Web browsing data
The IT systems and software programs used for running this website collect certain personal data whose transmission is implicit in the use of Internet communication protocols (e.g. the IP addresses or domain names of the computers used by users who access the website, as well as the URI addresses -Uniform Resource Identifier - of the information requested, the time of the request, the method used to submit the request to the server, the size of the file obtained in response, the numerical code indicating the status of the response given by the server -success, error, etc.). and other parameters relating to the operating system and to the user’s IT environment. This information is not collected in order to be linked to identified data subjects, but by its nature could, through processing and association with data held by third parties, allow users to be identified.


The data is used for the sole purpose of obtaining statistical information not associated with any user identification data on the use of the website and to check that it is functioning correctly and is deleted immediately after processing. The data may be used to ascertain liability in the event of hypothetical computer crimes against the website.

Data provided voluntarily by the user

The user is not required to provide his or her personal data in order to access this website.

However, any contact with FAE, or the discretionary, deliberate or spontaneous sending of messages, e-mails or conventional mail, to the FAE addresses indicated on this website will result in the subsequent acquisition of the address, including e-mail, of the sender or their telephone number, which are needed in order to respond to requests, as well as any other personal data included in their correspondence.

The data will be used only for the purpose of responding to the user's request. It will be used only internally for commercial purposes and will not be passed on to third parties.

The processing of data for these purposes does not require your consent since it is necessary for the implementation of a contract to which you are a party or the implementation of pre-contractual measures taken at your request (Article 6, paragraph 1, letter b) of the Regulation), as well as, where applicable, to fulfil a legal obligation (Article 6, paragraph 1, letter a) of the Regulation).

The processing of the data will be carried out by personnel appointed by FAE using procedures, technical and IT tools intended to protect the confidentiality and security of your data and involves collecting, recording, organizing, storing, consulting, processing, modifying, selecting, extracting, comparing, using, linking, blocking, communicating, disseminating, deleting or destroying said data including a combination of two or more of the above activities.
Your data will not be passed on to others.

Within the scope of its activities and for the purposes indicated above, FAE may use services provided by third parties acting on behalf of FAE and according to its instructions, as data controllers. These third parties provide FAE with processing or core services (e.g. IT services for the functioning of the site). You can request a complete and updated list of the persons appointed as data controllers by getting in touch with one of the contacts listed below.
The data may be circulated within the European Union, where FAE or its suppliers are based or have their own servers in these countries. The data will not be circulated outside the European Union.
FAE shall have the right, at any time, to exercise the rights provided for under current legislation, including the right to:

by sending a specific request to XX email: privacy@fae-group.it

Unsubscribe from Newsletter
At any time the User can cancel his/her subscription to the FAE Newsletter by following the instructions given in the email received.

Website guidelines for curriculum vitae collection

Purpose of processing
We inform you that the personal data voluntarily provided by you will be processed by , as personal data controller, exclusively for the research and selection of personnel, for current and future open positions, via paper-based, electronic or telematic means, whichever is most suitable for guaranteeing the security and confidentiality of the related processed data.

Processing procedure
Personal data will be processed mainly using IT equipment. Personal data that you voluntarily provide, either by filling in online forms or by spontaneous submission of your curriculum vitae, via the website of as part of the application process, will be stored in a data handling application of exclusively for the purposes indicated above, and for the period stipulated by the relevant legislation.
For the purposes of this paragraph, undertakes to observe specific security measures to prevent the loss of data, its illicit or incorrect use and unauthorised access, in full compliance with the laws and regulations.

Compulsory/voluntary provision of data
Personal data is provided voluntarily. However, the refusal of the interested party to provide personal data will make it impossible for the Data Controller’s to process the data and, consequently, it will be impossible to evaluate the application and to proceed with a potential selection of the candidate.

Data Controller and Responsible Officer
The Controller for the described processing activities is , with headquarters in .
Processing operations will be carried out by Assignees appointed by the Data Controller and/or the Officer responsible for data processing, who operate under their direct authority in compliance with the instructions received.

Persons/bodies to whom/which personal data may be communicated, or who may access them in their capacity as Responsible Officers or data processing officers
For the sole purpose of maintaining this website and the database containing personal data received, may use third parties that, in this way, may gain access to your data. In any case, these bodies guarantee the adoption of security and confidentiality criteria equivalent to those adopted by , and operate in the capacity of external data processing bodies.

Rights of the interested party
The interested party has the right to obtain confirmation of the existence of his/her personal data, and of their communication, in an intelligible manner.
The interested party has the right to know the content and the origin of the personal data.
The interested party furthermore has the right to demand:

a) the updating, amendment, or, where he/she has an interest in it, the integration of the data;
b) the deletion, anonymization or blocking of unlawfully processed data, including data that does not need to be retained for the purposes for which it was collected or subsequently processed;
c) confirmation that those to whom the data is communicated or disclosed are notified of the actions referred to under points (a) and (b), including their content, unless the fulfilment thereof proves impossible or involves the use of means that are clearly disproportionate to the right being protected.

The interested party has the right to object, in whole or in part, for legitimate reasons, to the processing of personal data concerning him/her, even if it is pertinent to the collection purposes stated;

In any case, the interested party remains free, at any time, to revoke consent by sending an informal notice to that effect to , at .