Trituradoras forestales para excavadoras
BL5/EX/VT - BL5/EX/SONIC

La trituradora con tecnología Bite Limiter para excavadoras de mediano y gran tamaño.

La BL5/EX/VT - BL5/EX/SONIC para excavadoras de entre 24 y 36 toneladas permite triturar vegetación de hasta 40 cm de diámetro y ofrece un diámetro de trabajo de 160 cm. Este cabezal es la solución ideal cuando se requiere una gran capacidad de trituración y una alta velocidad de intervención en el manejo  de vegetación en zonas boscosas. El rotor con tecnología Bite Limiter está equipado con limitadores especiales  de acero antidesgastante que limitan la profundidad de acción de los dientes. De esta manera se reduce la demanda de potencia y se proporciona una velocidad de trabajo constante, obteniendo resultados excepcionales en la trituración de todo tipo de madera y optimizando el consumo de combustible.
"La BL5/EX/VT cuenta con un motor VT (Variable Torque) que mejora considerablemente el rendimiento, aumenta el torque cuando es necesario, minimiza el riesgo de bloqueo del rotor y disminuye el tiempo de recuperación. 

Como en todos los producrtos de FAE, la robusta estructura y láminas de acero antidesgastante del interior de la cámara de trituración garantizan una alta durabilidad.  Las cuchillas de contra corte atornilladas ""Spike Pro"" permiten obtener una trituración muy fina del material procesado y hacen que el mantenimiento sea muy fácil. La transmisión por correa Poly Chain ofrece una transferencia óptima de potencia y una alta resistencia.

La BL5/EX/VT puede equiparse con el exclusivo sistema Sonic de FAE. Sonic garantiza el acople perfecto entre la máquina operadora y la trituradora FAE, gracias a la calibración automática de la trituradora. Este sistema también gestiona de forma constante los parámetros hidráulicos de la trituradora, brindando un aumento significativo de la productividad de hasta un 30%. El sistema Sonic también minimiza el riesgo de bloqueo del rotor y disminuye el tiempo de recuperacion, gracias a una rápida recuperación de las revoluciones del rotor. Este cabezal puede además equiparse con un pulgar hidráulico que permite manipular mejor el material en el suelo."

Diámetro maximo de trituración

Ø 40 cm máx

Caudal

entre 180 y 300 L/min

Peso de excavadora

entre 24 y 36 t

Las características más importantes
Bite Limiter

velocidad y prestaciones excepcionales con una menor demanda de potencia

Spike pro control

Y su distribución genera un resultado de material más fino

Transmisión por correa Poly Chain (solo VT)

 óptima transferencia de potencia

Motor VT

Incremento de par automático

El nuevo Sistema Sonic (BL5/EX/SONIC)

es un sistema automatizado de control y manejo de transmisión hidráulica que permite obtener el máximo rendimiento en todas las condiciones

Aplicaciones:

  • Gestión de áreas boscosas y forestales
  • Medio ambiente y proteccion de habitas naturales
BL5/EX/VT - BL5/EX/SONIC

Equipamiento de serie

    • Cuerpo y estructura interno “anti polvo”
    • Motor integrado a la estructura
    • Mamparo para conexiones hidráulicas
    • Laminas laterales con refuerzo adicional
    • Cuchilla contra corte Spike Pro
    • Transmisión por correas in Poly-Chain® Carbon
    • Motor hidráulico de pistones de torque variable de 160/108 cc (VT)
    • Motor hidráulico de pistones de torque variable de 160cc. (SONIC)
    • Rotor Bite Limiter
    • Válvula de control de flujo del sistema
    • Válvula de alivio y anti cavitactión
    • Válvula diversificadora (enchufe y opere)
    • Sistema Sonic (SONIC)
    • Compuerta de trituración frontal hidráulica
    • Deflector
    • Pulgar fijo frontal
    • Patines ajustables

Dientes

Concebidos para ser inimitables
Cuchilla BL
optional
Ideal para:
Árboles de fibras cortas
Árboles de fibras largas
Tocones desenterrados
Arbustos y matorrales
Raspador lateral C/3/SS sx
standard
Ideal para:
Raspador lateral C/3/SS dx
standard
Ideal para:

Equipamiento a petición

Motor hidráulico con mecanismo de ajuste (VT)
Pulgar excavadora hidráulica
Soporte de acople con pasadores sobre medidas
Compuerta de trituración frontal hidráulica con control de línea de excavadora AUX (VT)
Tecnología
Rotor Bite Limiter

De la experiencia de FAE Group, nace una nueva línea de trituradoras profesionales para excavadoras equipada con la tecnología Bite Limiter.

El rotor Bite Limiter está equipado con perfiles especiales de acero Hardox antidesgaste, los cuales garantizan una profundidad ideal de corte de las cuchillas (tipo E, E/HD o BL).

De esta forma, se reduce la demanda de potencia y se favorece una velocidad de trabajo constante, obteniendo prestaciones excepcionales en la trituración de todo tipo de madera. El Bite Limiter también reduce la posibilidad de que el rotor se bloquee y optimiza el consumo de combustible.

Tecnología
SONIC

Sonic es un sistema inteligente y flexible que permite calibrar automáticamente los parámetros hidráulicos de la trituradora gracias a un box de control gestionado por el operador, que, en cualquier condición de funcionamiento, de modo autónomo y constante, permite que la trituradora trabaje al máximo de sus capacidades. Sonic garantiza una perfecta combinación entre la máquina operadora y la trituradora FAE, aumentando en un 30% las prestaciones de la máquina.

Tecnología
Motor "VT" (Variable Torque) de pistones

El motor "VT" (Variable Torque) de pistones mejora considerablemente las prestaciones de la trituradora, aumentando su par de trituración cuando se requiere una mayor potencia, y reduciendo al máximo las condiciones de bloqueo del rotor. El motor VT ayuda al operador durante la trituración, lo cual le permite obtener prestaciones excepcionales.

Solicita información

PRIVACY POLICY - DATA PROTECTION STATEMENT

Pursuant to current legislation and the provisions of Article 13 of EU Regulation 2016/679 of the European Parliament and the Council of Europe of 27 April 2016 dealing with the protection of natural persons with regard to the processing of personal data and the free circulation of said data (hereinafter "Regulation"), we inform you that the Data Controller of the data you have provided is FAE Group S.p.A. (hereinafter FAE) whose registered office is Unit 18| of the Zona produttiva I-38013 Fondo (TN) Tax Code and VAT no. 01942570225

Web browsing data
The IT systems and software programs used for running this website collect certain personal data whose transmission is implicit in the use of Internet communication protocols (e.g. the IP addresses or domain names of the computers used by users who access the website, as well as the URI addresses -Uniform Resource Identifier - of the information requested, the time of the request, the method used to submit the request to the server, the size of the file obtained in response, the numerical code indicating the status of the response given by the server -success, error, etc.). and other parameters relating to the operating system and to the user’s IT environment. This information is not collected in order to be linked to identified data subjects, but by its nature could, through processing and association with data held by third parties, allow users to be identified.


The data is used for the sole purpose of obtaining statistical information not associated with any user identification data on the use of the website and to check that it is functioning correctly and is deleted immediately after processing. The data may be used to ascertain liability in the event of hypothetical computer crimes against the website.

Data provided voluntarily by the user

The user is not required to provide his or her personal data in order to access this website.

However, any contact with FAE, or the discretionary, deliberate or spontaneous sending of messages, e-mails or conventional mail, to the FAE addresses indicated on this website will result in the subsequent acquisition of the address, including e-mail, of the sender or their telephone number, which are needed in order to respond to requests, as well as any other personal data included in their correspondence.

The data will be used only for the purpose of responding to the user's request. It will be used only internally for commercial purposes and will not be passed on to third parties.

The processing of data for these purposes does not require your consent since it is necessary for the implementation of a contract to which you are a party or the implementation of pre-contractual measures taken at your request (Article 6, paragraph 1, letter b) of the Regulation), as well as, where applicable, to fulfil a legal obligation (Article 6, paragraph 1, letter a) of the Regulation).

The processing of the data will be carried out by personnel appointed by FAE using procedures, technical and IT tools intended to protect the confidentiality and security of your data and involves collecting, recording, organizing, storing, consulting, processing, modifying, selecting, extracting, comparing, using, linking, blocking, communicating, disseminating, deleting or destroying said data including a combination of two or more of the above activities.
Your data will not be passed on to others.

Within the scope of its activities and for the purposes indicated above, FAE may use services provided by third parties acting on behalf of FAE and according to its instructions, as data controllers. These third parties provide FAE with processing or core services (e.g. IT services for the functioning of the site). You can request a complete and updated list of the persons appointed as data controllers by getting in touch with one of the contacts listed below.
The data may be circulated within the European Union, where FAE or its suppliers are based or have their own servers in these countries. The data will not be circulated outside the European Union.
FAE shall have the right, at any time, to exercise the rights provided for under current legislation, including the right to:

by sending a specific request to XX email: privacy@fae-group.it

Unsubscribe from Newsletter
At any time the User can cancel his/her subscription to the FAE Newsletter by following the instructions given in the email received.

Website guidelines for curriculum vitae collection

Purpose of processing
We inform you that the personal data voluntarily provided by you will be processed by , as personal data controller, exclusively for the research and selection of personnel, for current and future open positions, via paper-based, electronic or telematic means, whichever is most suitable for guaranteeing the security and confidentiality of the related processed data.

Processing procedure
Personal data will be processed mainly using IT equipment. Personal data that you voluntarily provide, either by filling in online forms or by spontaneous submission of your curriculum vitae, via the website of as part of the application process, will be stored in a data handling application of exclusively for the purposes indicated above, and for the period stipulated by the relevant legislation.
For the purposes of this paragraph, undertakes to observe specific security measures to prevent the loss of data, its illicit or incorrect use and unauthorised access, in full compliance with the laws and regulations.

Compulsory/voluntary provision of data
Personal data is provided voluntarily. However, the refusal of the interested party to provide personal data will make it impossible for the Data Controller’s to process the data and, consequently, it will be impossible to evaluate the application and to proceed with a potential selection of the candidate.

Data Controller and Responsible Officer
The Controller for the described processing activities is , with headquarters in .
Processing operations will be carried out by Assignees appointed by the Data Controller and/or the Officer responsible for data processing, who operate under their direct authority in compliance with the instructions received.

Persons/bodies to whom/which personal data may be communicated, or who may access them in their capacity as Responsible Officers or data processing officers
For the sole purpose of maintaining this website and the database containing personal data received, may use third parties that, in this way, may gain access to your data. In any case, these bodies guarantee the adoption of security and confidentiality criteria equivalent to those adopted by , and operate in the capacity of external data processing bodies.

Rights of the interested party
The interested party has the right to obtain confirmation of the existence of his/her personal data, and of their communication, in an intelligible manner.
The interested party has the right to know the content and the origin of the personal data.
The interested party furthermore has the right to demand:

a) the updating, amendment, or, where he/she has an interest in it, the integration of the data;
b) the deletion, anonymization or blocking of unlawfully processed data, including data that does not need to be retained for the purposes for which it was collected or subsequently processed;
c) confirmation that those to whom the data is communicated or disclosed are notified of the actions referred to under points (a) and (b), including their content, unless the fulfilment thereof proves impossible or involves the use of means that are clearly disproportionate to the right being protected.

The interested party has the right to object, in whole or in part, for legitimate reasons, to the processing of personal data concerning him/her, even if it is pertinent to the collection purposes stated;

In any case, the interested party remains free, at any time, to revoke consent by sending an informal notice to that effect to , at .