Stabilisatrices
STABI-H - STABI/H/HP

Stabilisateur avec chambre à géométrie variable.

Le nouveau STABI/H pour tracteurs avec une puissance allant de 300 à 500 ch est un stabilisateur professionnel de dernière génération, conçu pour stabiliser le sol et le rendre adapté pour la construction de sentiers, routes, autoroutes, voies ferrées, zones de stationnement, terrains de sport, zones commerciales, installations industrielles et autres travaux d'infrastructure. Son design robuste et son nouveau système de porte-outils breveté par FAE garantissent des performances élevées et durables dans toutes les conditions de travail, y compris sur les terrains particulièrement difficiles en raison de la présence de pierres. La chambre à géométrie variable (rotor mobile) et la transmission intégrée dans le rotor permettent en outre de travailler le sol avec une précision extrême, jusqu'à une profondeur de 50 cm.

Puissance tracteur

de 300 à 500 CV

Profondeur max. de travail

60 cm max

Fonctionnalités principales
Caisse de broyage à géométrie variable

Une terre stabilisée de manière homogène à toutes les profondeurs de travail

ROTOR SOLIDE MOBILE INNOVANT

pour la stabilisation à faible absorption de puissance 

PROTECTIONS INTERNES ET LATÉRALES EN HARDOX®, INTERCHANGEABLES

Applications :

  • CONSTRUCTION DE ROUTES
  • STABILISATION DU SOL
  • STABILISATION EN PRÉSENCE DE PIERRES ET D’ASPHALTE
STABI-H - STABI/H/HP

Équipement de série

    • Capot arrière hydraulique avec système anti-colmatage NEW
    • Protections internes en Hardox®
    • Chassis anti “poussière“ complètement fermé
    • Caisse de broyage à géométrie variable
    • Protection latérale intérieure
    • Chaînes de protection anti-usure boulonnées
    • Transmission par courroie en Poly-Chain® Carbon
    • Transmission à pignons
    • Kit de refroidissement des réducteurs latéraux
    • Boîtier avec roue libre
    • Moteur hydraulique de 8 cc avec valve anti-cavitation
    • Embrayage à cames sur prise de force latérale
    • Boîtier avec système de refroidissement de l’huile (HP)
    • Arbres de rotor boulonnés (en acier forgé)
    • Patins d’appuie réglables
    • Lame doseuse

Outils

Conçus pour être inimitables
Marteaux A/3
standard
Idéal pour:
Sol tourbeux
Marteaux A/3/HD
optional
Idéal pour:
Sol tourbeux
Peu de pierres
Marteaux F/3
optional
Idéal pour:
Rochers
Routes goudronnées
Marteaux F/3 R44-22
optional
Idéal pour
Sol tourbeux
Routes goudronnées
Marteaux lateral STC/FP
standard
Idéal pour:
Sol tourbeux
Rochers

Équipement sur demande

Possibilité de choisir entre different types d'outils
Troisième point hydraulique
Bandes de nivellement sur porte arrière amorties
Système d'aspersion d'eau WSS High Flow
Système d'aspersion d'eau FCS "Full Controll"
Technologie
Caisse de broyage à géométrie variable

Une solution technologique unique dans le secteur, qui permet de pénétrer le sol uniquement avec le rotor. Le rotor mobile est à réglage hydraulique depuis la cabine du tracteur. Le volume de la chambre est variable : plus on travaille en profondeur, plus le volume de la chambre augmente.

Par rapport à une machine qui s'enfonce avec le châssis dans le sol, la chambre à géométrie variable réduit l'effort de traction, ce qui se traduit par une réduction de la consommation de carburant, une vitesse de fonctionnement plus élevée et donc un gain de temps plus important.

Technologie
Full Control System

Le Full Control System est un système haut de gamme composé de buses à régulation électronique, d'une pompe auto-amorçante à actionnement hydraulique, de vannes proportionnelles pour réguler le débit de distribution d'eau et d'un écran de contrôle pour les réglages, les diagnostics et l'état de fonctionnement de la machine.

PRIVACY POLICY - DATA PROTECTION STATEMENT

Pursuant to current legislation and the provisions of Article 13 of EU Regulation 2016/679 of the European Parliament and the Council of Europe of 27 April 2016 dealing with the protection of natural persons with regard to the processing of personal data and the free circulation of said data (hereinafter "Regulation"), we inform you that the Data Controller of the data you have provided is FAE Group S.p.A. (hereinafter FAE) whose registered office is Unit 18| of the Zona produttiva I-38013 Fondo (TN) Tax Code and VAT no. 01942570225

Web browsing data
The IT systems and software programs used for running this website collect certain personal data whose transmission is implicit in the use of Internet communication protocols (e.g. the IP addresses or domain names of the computers used by users who access the website, as well as the URI addresses -Uniform Resource Identifier - of the information requested, the time of the request, the method used to submit the request to the server, the size of the file obtained in response, the numerical code indicating the status of the response given by the server -success, error, etc.). and other parameters relating to the operating system and to the user’s IT environment. This information is not collected in order to be linked to identified data subjects, but by its nature could, through processing and association with data held by third parties, allow users to be identified.


The data is used for the sole purpose of obtaining statistical information not associated with any user identification data on the use of the website and to check that it is functioning correctly and is deleted immediately after processing. The data may be used to ascertain liability in the event of hypothetical computer crimes against the website.

Data provided voluntarily by the user

The user is not required to provide his or her personal data in order to access this website.

However, any contact with FAE, or the discretionary, deliberate or spontaneous sending of messages, e-mails or conventional mail, to the FAE addresses indicated on this website will result in the subsequent acquisition of the address, including e-mail, of the sender or their telephone number, which are needed in order to respond to requests, as well as any other personal data included in their correspondence.

The data will be used only for the purpose of responding to the user's request. It will be used only internally for commercial purposes and will not be passed on to third parties.

The processing of data for these purposes does not require your consent since it is necessary for the implementation of a contract to which you are a party or the implementation of pre-contractual measures taken at your request (Article 6, paragraph 1, letter b) of the Regulation), as well as, where applicable, to fulfil a legal obligation (Article 6, paragraph 1, letter a) of the Regulation).

The processing of the data will be carried out by personnel appointed by FAE using procedures, technical and IT tools intended to protect the confidentiality and security of your data and involves collecting, recording, organizing, storing, consulting, processing, modifying, selecting, extracting, comparing, using, linking, blocking, communicating, disseminating, deleting or destroying said data including a combination of two or more of the above activities.
Your data will not be passed on to others.

Within the scope of its activities and for the purposes indicated above, FAE may use services provided by third parties acting on behalf of FAE and according to its instructions, as data controllers. These third parties provide FAE with processing or core services (e.g. IT services for the functioning of the site). You can request a complete and updated list of the persons appointed as data controllers by getting in touch with one of the contacts listed below.
The data may be circulated within the European Union, where FAE or its suppliers are based or have their own servers in these countries. The data will not be circulated outside the European Union.
FAE shall have the right, at any time, to exercise the rights provided for under current legislation, including the right to:

by sending a specific request to XX email: privacy@fae-group.it

Unsubscribe from Newsletter
At any time the User can cancel his/her subscription to the FAE Newsletter by following the instructions given in the email received.

Website guidelines for curriculum vitae collection

Purpose of processing
We inform you that the personal data voluntarily provided by you will be processed by , as personal data controller, exclusively for the research and selection of personnel, for current and future open positions, via paper-based, electronic or telematic means, whichever is most suitable for guaranteeing the security and confidentiality of the related processed data.

Processing procedure
Personal data will be processed mainly using IT equipment. Personal data that you voluntarily provide, either by filling in online forms or by spontaneous submission of your curriculum vitae, via the website of as part of the application process, will be stored in a data handling application of exclusively for the purposes indicated above, and for the period stipulated by the relevant legislation.
For the purposes of this paragraph, undertakes to observe specific security measures to prevent the loss of data, its illicit or incorrect use and unauthorised access, in full compliance with the laws and regulations.

Compulsory/voluntary provision of data
Personal data is provided voluntarily. However, the refusal of the interested party to provide personal data will make it impossible for the Data Controller’s to process the data and, consequently, it will be impossible to evaluate the application and to proceed with a potential selection of the candidate.

Data Controller and Responsible Officer
The Controller for the described processing activities is , with headquarters in .
Processing operations will be carried out by Assignees appointed by the Data Controller and/or the Officer responsible for data processing, who operate under their direct authority in compliance with the instructions received.

Persons/bodies to whom/which personal data may be communicated, or who may access them in their capacity as Responsible Officers or data processing officers
For the sole purpose of maintaining this website and the database containing personal data received, may use third parties that, in this way, may gain access to your data. In any case, these bodies guarantee the adoption of security and confidentiality criteria equivalent to those adopted by , and operate in the capacity of external data processing bodies.

Rights of the interested party
The interested party has the right to obtain confirmation of the existence of his/her personal data, and of their communication, in an intelligible manner.
The interested party has the right to know the content and the origin of the personal data.
The interested party furthermore has the right to demand:

a) the updating, amendment, or, where he/she has an interest in it, the integration of the data;
b) the deletion, anonymization or blocking of unlawfully processed data, including data that does not need to be retained for the purposes for which it was collected or subsequently processed;
c) confirmation that those to whom the data is communicated or disclosed are notified of the actions referred to under points (a) and (b), including their content, unless the fulfilment thereof proves impossible or involves the use of means that are clearly disproportionate to the right being protected.

The interested party has the right to object, in whole or in part, for legitimate reasons, to the processing of personal data concerning him/her, even if it is pertinent to the collection purposes stated;

In any case, the interested party remains free, at any time, to revoke consent by sending an informal notice to that effect to , at .