Soil Stabilizers

Stabilizer with variable-geometry chamber.

The new STABI/H for tractors from 300 to 500 hp is a latest-generation professional stabilizer, designed to stabilize the soil and make it suitable for the construction of paths, roads, highways, railroad tracks, parking areas, sports fields, shopping areas, industrial plants and other infrastructural work. The robust design and the FAE patented new tool holder guarantee long and high performance in all working conditions, even on very hard ground with stones. The variable geometry chamber (mobile rotor) and transmission built into the rotor also enable earthworking with extreme precision and high quality, up to 50 cm deep.


from 300 to 500 hp

Working depth

50 cm max

Most important features
Displacement Chamber

the result is a homogeneously stabilised soil at all working depths


for stabilization with low power absorption





Standard equipment

    • Hydraulic rear Hood with anti-clogging system NEW
    • Interchangeable inner antiwear plates in Hardox®
    • Enclosed machine body
    • Displacement Chamber
    • Inside lateral protection
    • Bolted on protection chains
    • Poly-Chain® belts transmission
    • Transmission with side gearbox
    • Side gearbox with oil cooling system
    • Gearbox with freewheel
    • 8cc gear motor with integrated anticavitation valve
    • Friction clutches
    • Gearbox with oil cooling system (HP)
    • Bolted-on rotor shafts (in forged steel)
    • Adjustable skids
    • Dozing blade


Designed to be incomparable
Teeth A/3
Ideal for:
Peaty soil
Teeth A/3/HD
Ideal for:
Peaty soil
Low rock content
Teeth F/3
Ideal for:
Paved roads
Teeth F/3 R44-22
Ideal for:
Peaty soil
Paved roads
Side scraper STC/FP
Ideal for:
Peaty soil


Multiple tooth options
Hydraulic top link
Dozing blades with spring system
Water spray system WSS High Flow
FCS full control system
Displacement Chamber

This technological solution, which is one of a kind in the industry, allows the ground to be penetrated with the rotor alone. The mobile rotor can be hydraulically adjusted from the tractor cabin. The chamber has a variable volume—the greater the working depth, the greater the volume of the chamber.

Compared to a machine that plunges the frame into the ground, the variable geometry chamber reduces traction stress, which decreases fuel consumption and increases operating speed, saving time as a result.

Full Control System

The Full Control System is a top-of-the-line system with electronically adjusted nozzles, a self-priming hydraulic pump, proportional valves to adjust the water flow and a control display unit for settings, diagnostics and the machine’s operating status.


Pursuant to current legislation and the provisions of Article 13 of EU Regulation 2016/679 of the European Parliament and the Council of Europe of 27 April 2016 dealing with the protection of natural persons with regard to the processing of personal data and the free circulation of said data (hereinafter "Regulation"), we inform you that the Data Controller of the data you have provided is FAE Group S.p.A. (hereinafter FAE) whose registered office is Unit 18| of the Zona produttiva I-38013 Fondo (TN) Tax Code and VAT no. 01942570225

Web browsing data
The IT systems and software programs used for running this website collect certain personal data whose transmission is implicit in the use of Internet communication protocols (e.g. the IP addresses or domain names of the computers used by users who access the website, as well as the URI addresses -Uniform Resource Identifier - of the information requested, the time of the request, the method used to submit the request to the server, the size of the file obtained in response, the numerical code indicating the status of the response given by the server -success, error, etc.). and other parameters relating to the operating system and to the user’s IT environment. This information is not collected in order to be linked to identified data subjects, but by its nature could, through processing and association with data held by third parties, allow users to be identified.

The data is used for the sole purpose of obtaining statistical information not associated with any user identification data on the use of the website and to check that it is functioning correctly and is deleted immediately after processing. The data may be used to ascertain liability in the event of hypothetical computer crimes against the website.

Data provided voluntarily by the user

The user is not required to provide his or her personal data in order to access this website.

However, any contact with FAE, or the discretionary, deliberate or spontaneous sending of messages, e-mails or conventional mail, to the FAE addresses indicated on this website will result in the subsequent acquisition of the address, including e-mail, of the sender or their telephone number, which are needed in order to respond to requests, as well as any other personal data included in their correspondence.

The data will be used only for the purpose of responding to the user's request. It will be used only internally for commercial purposes and will not be passed on to third parties.

The processing of data for these purposes does not require your consent since it is necessary for the implementation of a contract to which you are a party or the implementation of pre-contractual measures taken at your request (Article 6, paragraph 1, letter b) of the Regulation), as well as, where applicable, to fulfil a legal obligation (Article 6, paragraph 1, letter a) of the Regulation).

The processing of the data will be carried out by personnel appointed by FAE using procedures, technical and IT tools intended to protect the confidentiality and security of your data and involves collecting, recording, organizing, storing, consulting, processing, modifying, selecting, extracting, comparing, using, linking, blocking, communicating, disseminating, deleting or destroying said data including a combination of two or more of the above activities.
Your data will not be passed on to others.

Within the scope of its activities and for the purposes indicated above, FAE may use services provided by third parties acting on behalf of FAE and according to its instructions, as data controllers. These third parties provide FAE with processing or core services (e.g. IT services for the functioning of the site). You can request a complete and updated list of the persons appointed as data controllers by getting in touch with one of the contacts listed below.
The data may be circulated within the European Union, where FAE or its suppliers are based or have their own servers in these countries. The data will not be circulated outside the European Union.
FAE shall have the right, at any time, to exercise the rights provided for under current legislation, including the right to:

by sending a specific request to XX email:

Unsubscribe from Newsletter
At any time the User can cancel his/her subscription to the FAE Newsletter by following the instructions given in the email received.